PERMAGLUE™ waterproofing granule replacement bonding adhesive, clear coat bucket

PERMAGLUE™ Shingle Roof Granule Replacement Adhesive

1 Gallon

$74.95 $79.95

PERMAGLUE™ Shingle Roof Granule Replacement Adhesive

Coverage Rate: 100 Square Feet Per Gallon

Regranulation Adhesive Sealer Clear Gloss Waterproofing for Replacing Shingle Roof Granules on Shingles.

$74.95 $79.95

PERMAGLUE™ is a Granule Replacement Bonding Sealer designed for regluing roof granules to roofing surfaces. Provides excellent film formation over non-porous or previously coated surfaces to also help rejuvenate, preserve, protect, waterproof and beautify.

The high-performance acrylic resin and special performance additives forms a clear sealer finish on most any surface and helps to restore the original color. Originally designed as a clear elastomeric sealer for roofing surfaces. Acrylic resins actually rejuvenate and promote in extending the life of the surface to which it is applied. It can be top coated using SHINGLE SEALER or PERMAKOTE SHINGLE Elastomeric Roof Coating for long lasting protection.

Granule Replacement Bonding Sealer Designed for Regluing Shingle Roof Granules to Roofing Surfaces.
Provides Excellent Film Formation Over Non-Porous or Previously Coated Surfaces to also help Rejuvenate, Preserve, Protect and Beautify Shingle Roof Surfaces.
Apply PERMAGLUE™ to Regranulate Roofs prior to SHINGLE SEALER or PERMAKOTE SHINGLE Application As Needed.
For Residential, Commercial and Industrial Shingle Roof Applications.
Low VOC and Environmentally Friendly.
Apply by Brush, Roller or Sprayer at 100 Square Feet per Gallon and broadcast Shingle Roof Granules into the PERMAGLUE™.

Call toll free 1-800-423-7264 to speak with a waterproofing expert.

Parent ASIN:

B0G1NGM1WX

Parent SKU:

7598

Product Information

Solids by weight: 60% +/- 2%
V.O.C.’s (averages): 0 lbs./gal. • 0 g/liter
Gallon weight: 8.9 lbs. +/- .3 lbs.

SURFACE PREPARATION: For proper adhesion it is essential that the surface is prepared properly. Clean Exterior Surfaces by thoroughly pressure washing with a water and chlorine solution using at least 1500 P.S.I. to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae. PERMAGLUE™ will resist mildew growth, but will not kill mildew already on the surface. Rinse thoroughly. Remove loose paint and powdery substances. Patch any holes, cracks, seams, imperfections, etc., with SUPERMAX™ Patch, Waterproofing Caulk & Sealant. Metal: Clean surface of all grease, oil and foreign matter before priming. Rusted metal and uncoated metal must be primed with SUPERMAX™ Metal Primer, a Red Iron Oxide Primer Sealer. Use a degreaser on galvanized or coated metals which have oils or surface treatments. Check PERMAGLUE™ adhesion on galvanized or coated metal by applying to a small area and evaluating after 48 hours. If lack of adhesion is present after evaluating, metal must be lightly scuffed without penetrating the coated finish or galvanizing. NOTE: New masonry must age 60 days before coating.

APPLICATION PROCEDURE: Stir well before using. Do not thin, use product as is. Do not apply when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had enough time to dry (approx. 1 to 2 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush, roller or spray. Spread adhesive uniformly. Spread Rate will vary depending on substrate. Apply a coat between 10 to 12 mils wet film thickness. Immediately lay the membrane into the adhesive. Reposition membrane as quickly as possible before adhesive sets up. Airless Sprayers: Use at least a 1 gallon per minute piston type airless sprayer with a maximum tip size of .021. Remove all line filters and gun filters before spraying. Clean Up: Clean all spills and tools immediately after use while coating is wet with warm soapy water.